Advanced Tab; V120 Lower Layer Compatibility; Connect Timeout; Inactivity Timer - ADTRAN Express 3100 User Manual

Generally, the format for the number is one seven-digit number.
If calls are not being rejected while the option is enabled and a
number is programmed, check the Status Buffer for the number of
the caller. The number of the caller should match exactly with the
number in the Call Rejection List.

Advanced Tab

Contains advanced instructions for the Express 3100.

V120 Lower Layer Compatibility

Sends a low-level compatibility information element as part of the
setup message.

Connect Timeout

Sets the length of time that the Express 3100 waits for the far-end
unit to answer an outgoing call.

Inactivity Timer

Defines the amount of time (in minutes) the Express 3100 remains
idle before automatically disconnecting the current data call. A
value of 0 indicates the Inactivity Timer is off.

Remote Password

Accepts the six digit numeric password for the remote unit called.
Valid characters are 0 through 9. Alphabetic characters are not ac-
cepted.

Test Timeout

Defines the amount of time (in minutes) the Express 3100 tests a
remote unit.

Auto Answer

Answers data calls in three different ways:
Enabled Automatically answers incoming data calls.
Disabled Does not answer data calls. An AT answer command,
ATA
Dump all calls Keeps the line free for outgoing calls by not answering
incoming calls.
61200240L2-20
Chapter 3. Using the Express Configuration Program
, must be issued before a call can be answered.
Express 3100 User Manual 3-15