Chapter 3. Using the Express Configuration Program
erences) to instruct the program to detect the connection without
your assistance.
Automatically Detecting the Unit on Startup
To instruct the ADTRAN Express Configuration program to automat-
ically detect on startup an Express 3100 unit on COM ports 1 through
4, check the Auto-Detect Express 3100 checkbox (under preferences).
This feature defaults to the auto-detect state. Uncheck the box to dis-
able auto-detection.
ADTRAN recommends that you use this feature to automatically de-
tect SPIDs and Switch Types, thus greatly reducing the occurrence of
time-consuming problems.
Using Caller ID
Caller ID allows you to view the number of an incoming Voice or Au-
dio call via a pop-up menu on your computer screen. To enable Caller
ID, check the Caller ID and capture COM port checkbox (under prefer-
ences).
If you want Caller ID information to display on the screen when you
are not using a terminal application or dial-up networking, check Cap-
ture COM Port on the Tray Tool menu (see also Capture COM Port on
page 3-4).
You can also view information in the Caller ID log buffer (see Display-
ing the Express 3100's Caller ID Log Buffer on page 3-22).
Using Terminal Software for Diagnostics
You can specify a software program to use for diagnostic test purpos-
es. Under preferences > Terminal Software, enter the Program Name
and Program Parameters. With this information entered, when you
click Terminal (under diagnostics), the program designated in these
fields launches.
61200240L2-20
Express 3100 User Manual
3-25
Need help?
Do you have a question about the Express 3100 and is the answer not in the manual?
Questions and answers