ADTRAN Express 3100 User Manual page 98

Appendix A. AT Commands and S-Registers
S-Registers List
Function
Command
DTE Stop
S74
DTE Flow
S75
Conference ID
S90
Transfer ID
S91
Message Waiting
S92
ID
Call Type
S93
Routing
Local Tones
S94
Chap Spoofing
S118
Enable
A-14
(Continued)
Features
Selects the number of asynchronous parity bits.
0=None
1=Odd
2=Even
Selects asynchronous flow control.
0=None
1=XON/OFF from DTE controls DCE
2=XON/OFF from DCE controls DTE
3=Hardware
12=Software
NI-1 feature identification number for conferencing. See
the ISDN service provider for this ID.
NI-1 feature identification number for transferring. See
the ISDN service provider for this ID.
NI-1 feature identification number for message waiting
indicator. See the ISDN service provider for this ID.
Determines how incoming call is routed when connected
to a point-to-point ISDN line.
0=Route all call types to DTE
Forces the POTS interface to generate all tones.
Bit 0=0:In-band tones from ISDN switch (when available)
Bit 0 =1:All tones generated locally
Bit 1 =0: Warnings to POTS when unavailable
Bit 1 =1:Disable all warnings to POTS
32 = CHAP enabled (Windows 95/98 setting)
0 = CHAP disabled
Express 3100 User Manual 61200240L2-20