Table of Contents
Advertisement
Chapter 3. Using the Express Configuration Program
Remote Access Protocols
Check with your systems administrator to determine which remote
access protocol to use.
Using Profiles
To use profiles, open the Express Configuration program. Then select
either isdn setup (ISDN profile) or profile setup (User profile) and
click the Setup button at the bottom of the screen. Figure 3-3 on page
3-7 shows the window that opens for an ISDN profile, and Figure 3-4
on page 3-10 shows the window that open for a User profile. These
windows contain function buttons and parameter tabs. Step-by-step
instructions for using the function buttons begin on page 3-17. Param-
eter tabs are described below.
ISDN Profile Window
The ISDN profile window contains three tabs: General, Packet, and
Preview. The General and Packet tabs contain fields for setting param-
eters. The Preview tab lists information about the profile shown in the
Name box.
Figure 3-3. ISDN Profile Setup Window
61200240L2-20
Express 3100 User Manual
3-7
Advertisement
Table of Contents
