Enable Distinctive Ringing; Protocols Tab; Type; Txinit - ADTRAN Express 3100 User Manual

Enable Distinctive Ringing

Instructs the Express 3100 to use distinctive rings that are easily
recognized on POTS ports 1 and 2.

Protocols Tab

From the Protocols Tab, you can define the BONDING specifications
using the following options:

Type

Defines the type of equipment used in a call. Set to ADTRAN Only
when originating BONDING calls to ADTRAN legacy ISU
equipment; otherwise, set this field to Multi-Vendor.

TXINIT

Specifies the length of time (in seconds) that the originating unit
attempts to detect the Async BONDING negotiating pattern from
the answering unit before determining Async BONDING has
failed.

TXFA

Specifies the length of time (in seconds) both units attempt to de-
tect the Async BONDING frame pattern when connecting a call
before determining Async BONDING has failed.

TXADD01

Specifies the length of time (in seconds) both units wait for an ad-
ditional call to connect at the end of negotiation before determin-
ing Async BONDING has failed.

TXDEQ

Specifies the length of time (in seconds) both units attempt to
equalize a network delay between ISDN B channels before deter-
mining Async BONDING has failed.

TANULL

Specifies the length of time (in seconds) the answering unit at-
tempts to detect Async BONDING negotiation from the originat-
ing unit before determining Async BONDING has failed.
61200240L2-20
Chapter 3. Using the Express Configuration Program
Express 3100 User Manual 3-13