Additional printer setup
Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic components
or connectors.
Available internal options
•
DDR3 DIMM
•
Flash memory
–
Fonts
–
Firmware
•
Forms Barcode
•
Prescribe
•
IPDS
•
Printcryption
•
*
Hard disk
•
Internal Solutions Ports (ISP)
–
Parallel 1284‑B interface
–
MarkNet N8130 10/100 fiber interface
–
RS‑232‑C serial interface
*
This internal option is available only in the M3150de printer model.
*
12
Need help?
Do you have a question about the M3150dn and is the answer not in the manual?