Table of Contents
Advertisement
Software Installation
Menu Options
Run at Windows Startup
Allows KSView to execute automatically when Windows startup. (Default is
unexecuted).
Disable Warning Message
Allows KSView Server to pop up warning message window when event occur
(Default is Enabled).
Config Setup
Configure mail alert setting. The mail alert settings should be configured so
that, in the event of a RAID failure, the RAID administrator will be notified at once.
The mail alert settings allow this to be done via email, so the administrator can
passively monitor RAID status from anywhere, without having to keep monitoring
KSView.
To configure the mail alert settings:
1. Click Config Setup. The System
Configuration Setup dialog box will
open.
2. Enter the following values:
Mail Server:
IP Address:
42
Enter the IP address of the mail server in your
network or its FQDN (e.g. kontron.com). If no Mail
Server information is added, the mail alert function will
be disabled.
Enter the IP address of the mail server in your
network or its FQDN (Entries in the top two fields
should be identical)
KISS-Stor 0/5 – User's Manual
Advertisement
Table of Contents
