Table of Contents
Advertisement
Components of the KISS-Stor 0/5
Components of the KISS-Stor 0/5
Drives Cage
The KISS-Stor 0/5 drives cage is designed to accommodate three 3.5 inch hard
disk drives (each SATA-HDD is mounted into a corresponding drive carrier).
3
Fig. 10: KISS-Stor 0/5 – Drives cage
without drive carriers (left side view)
Legend for Fig. 10 and 10a:
1 Drives cage of the KISS-Stor 0/5
2 Holes for mounting screws on the
left side
3 Rail channel on the left side
Holes for Mounting Screws
The holes for mounting screws allows you to mount the KISS-Stor 0/5 drives cage
into the drive cage of the computer system by the supplied M3 metric screws.
24
1
2
6
Use only the supplied M3 metric screws (M3x5). Four
screws on each side are sufficient for mounting the KISS-
Stor 0/5 drives cage into the drive cage of the computer
system.
1
6
Fig. 10a: KISS-Stor 0/5 – Drives cage
without drive carriers (right side view)
4 Holes for mounting screws on the
right side
5 Rail channel on the right side
6 Guide ribs for drive carriers
KISS-Stor 0/5 – User's Manual
5
4
Advertisement
Table of Contents
