Characteristics - Panasonic KX-NS500 Installation Manual

2.3.2 Characteristics

2.3.2 Characteristics
KX-NS500
Terminal Equipment Loop Limit
Minimum Leakage Resistance
Maximum Number of Extension
Instruments per Line
Ring Voltage
Trunk Loop Limit
Hookswitch Flash/Recall Timing
Range
Door Opener Current Limit
External Sensor Current Limit
Paging Terminal Impedance
MOH (Music on Hold) Terminal
Impedance
KX-NS520
Terminal Equipment Loop Limit
Minimum Leakage Resistance
Maximum Number of Extension
Instruments per Line
Ring Voltage
Trunk Loop Limit
Hookswitch Flash/Recall Timing
Range
Door Opener Current Limit
External Sensor Current Limit
Paging Terminal Impedance
MOH (Music on Hold) Terminal
Impedance
34 Installation Manual
• SLT: 600 W including set
• Doorphone: 20 W
15 000 W minimum
1 for SLT
75 Vrms at 20 Hz/25 Hz depending on the Ringing Load
1600 W maximum
24 ms to 2032 ms
24 V DC/30 V AC, 1 A maximum
Power to the external sensor is provided from the DPH2 card and must
be grounded through the DPH2 card. For the connection diagram,
refer to "4.7.1 DPH2 Card (KX-NS5162)". The PBX detects input from
the sensor when the signal is under 100 W.
600 W
10 000 W
SLT: 600 W including set
•
• Doorphone: 20 W
15 000 W minimum
1 for SLT
75 Vrms at 20 Hz/25 Hz depending on the Ringing Load
1600 W maximum
24 ms to 2032 ms
24 V DC/30 V AC, 1 A maximum
Power to the external sensor is provided from the DPH2 card and must
be grounded through the DPH2 card. For the connection diagram,
refer to "4.7.1 DPH2 Card (KX-NS5162)". The PBX detects input from
the sensor when the signal is under 100 W.
600 W
10 000 W