Panasonic KX-NS500 Installation Manual page 166

5.4.1 Easy Setup Wizard
Extension Number
Floating Extension Number
UM Group
DISA (1–64)
Built-in Simplified Voice
Message (SVM)
Analogue Remote Maintenance
TAFAS (Pager)
ICD Group (1–64)
ISDN Remote Maintenance
UM Channel (1–2)
4.
In the Manager/Operator settings:
a.
Select an extension number for the manager from the drop-down list.
b.
Select an extension number for the operator from the drop-down list.
c.
Click Next.
5.
In the Trunk settings:
a.
In CO Dialing Mode, select the appropriate option.
b.
In Selection for PRI30/E1, select the appropriate option.
c.
Select an option for Incoming Call Distribution Group. You can select "Yes" or "No". Refer to the
information on this screen for details.
d.
Click Next.
6.
In the LAN settings:
The IP addresses for the PBX, DNS server, and DSP cards can be assigned automatically through a DHCP
server or entered manually.
When using a DHCP server:
a.
Select Obtain an IP address automatically.
b.
Select Obtain DNS server address automatically.
c.
Select Obtain DSP IP address automatically.
Notice
The boxes will turn grey and the IP address information will be assigned automatically.
Write down the address information assigned to the PBX for future reference.
d.
Click Next.
When not using a DHCP server:
a.
Select Use the following IP address.
b.
Enter an IP address
gateway, depending on your network configuration.)
c.
Select Use the following DNS server address.
166 Installation Manual
3 digits
Extension
Number
101–xxx
201–xxx
501–564
601–664
592, 593
, subnet mask , and default gateway
*1 *2
4 digits
Extension
Number
1001–xxxx
or or
2001–xxxx
500 5000
5001–5064
591 5091
599 5099
600 6000
6001–6064
699 6099
5092, 5093
. (You may not need to specify the default
*1