Panasonic KX-NS500 Installation Manual page 155

–
Baud Rate (bps)
–
Flow Control
–
Command
5.
Enter Password.
6.
Click Connect button.
Connection via PRI30/E1 Card (KX-NS5290CE)
ISDN MODEM
PC
To connect a PC to the KX-NS500
1.
Start Off-line WebMC launcher.
2.
Click the Connect-Online Mode(C) button.
3.
Select the ISDN Remote tab.
4.
In Telephone Number, enter a telephone number.
5.
In Password, enter the password.
6.
Click the Connect button.
MNT Port
By connecting a USB-LAN adaptor to the USB port you can access the PBX over a LAN.
Notice
•
When connecting the PC to the MNT port, if the PC is set to obtain the IP address automatically, the
IP address of the PC will be set to an appropriate IP address to establish a connection to the PBX.
•
Only recommended USB-LAN adaptors cane be used. For information on recommended products,
consult you dealer.
ISDN Line
Network
PRI30/E1 Card (KX-NS5290CE) is installed
in KX-NS500
5.2 PC Connection
Installation Manual 155