De-Registering Ip Telephones - Panasonic KX-NS500 Installation Manual

5.8.2 De-registering IP Telephones

De-registration of IP-PTs or KX-UT Series SIP Phones
Once the IP-PT or SIP phone is successfully de-registered, the status of the IP telephone will update to show
"None".
1. Make sure the IP Terminal Registration Mode is set to
Manual.
a. Click Setup ® PBX Configuration ®
Configuration ® Slot ® System Property ®
Site ® Main.
b.
In the Main tab, select Manual for IP Terminal
Registration Mode.
c.
Click OK.
2. a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
b.
Place the mouse cursor over the Virtual Slot, and
in the menu that appears, click Select Shelf.
c.
For IP-PTs:
Move the mouse pointer over the V-IPEXT32 card
(Virtual 32-Channel VoIP Extension Card).
For KX-UT series SIP phones:
Move the mouse pointer over the V-UTEXT32 card
(Virtual UT Extension Card).
A menu will be shown under the mouse pointer.
d.
Click Port Property.
3. Click De-registration.
A dialogue box will appear. Registered extension
numbers and names are displayed on the left.
4. a.
Highlight numbers and names and click the right
arrow to select them for de-registration.
b.
Click Next.
A dialogue box will appear.
c.
Click Confirm.
•
If the de-registration is successful, the dialogue
box will show "De-registration succeed!".
d.
Click Close.
5.8.2 De-registering IP Telephones
Installation Manual 223