Panasonic KX-NS500 Installation Manual page 200

5.7.2 Setting VLAN Parameters
Note
The illustrations may differ from the buttons on your telephone.
KX-NT321/KX-NT511/KX-NT551
After assigning
the IP addresses
Select "VLAN (Enable)".
To set the VLAN ID for the primary port
Select "VLAN (Primary)".
Select "Priority".
To set the VLAN ID for the secondary port
Select "VLAN (Secondary)".
Select "Priority".
To end programming
Press HOLD three
times to return to the
Menu screen.
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
*1
the priority.
Note
•
For KX-NT511 Users
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"5.7.1 Assigning IP Addressing Information".
200 Installation Manual
Select "QoS". Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE. Select "VLAN ID".
VLAN Priority *1
0–7
Press SP-PHONE. Select "VLAN ID".
VLAN Priority *1
0–7
Press STORE.
Select "VLAN".
VLAN ID
1–4094
0-4094 (Only for KX-NT55x)
Press SP-PHONE.
VLAN ID
1–4094
0-4094 (Only for KX-NT55x)
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.