Panasonic KX-NS500 Installation Manual page 187

KX-NT265 (Software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
VOL
Press VOLUME to
select "Network".
IP Address*
To set the subnet mask address
VOL
Press VOLUME to
select "Subnet Mask".
To set the default gateway address (if required)
VOL
Press VOLUME to
select "Default GW".
To set VLAN parameters
HOLD
Press HOLD to return
to the Menu screen.
OR
To end programming
HOLD
Press HOLD to return
to the Menu screen.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
PROG.
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE.
1
Press SP-PHONE.
Subnet Mask Address*
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
To the VLAN settings
Press STORE.
5.7.1 Assigning IP Addressing Information
VOL
Press VOLUME to Press SP-PHONE
select "DHCP (Disable)". twice.
2
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
3
Press SP-PHONE.
Installation Manual 187