MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
Operation Manual
4.6.2 Fitting the Aerial
(1) Remove the protection cap on the outlet of the rotating base.
(2) Fit the aerial on to the rotating base. Orient the aerial front face (the company logo
printed on it) to the direction to which two arrow-marks on the rotating base point.
(3) Fix the aerial with four bolts attached to the aerial base.
Protection cap
Figure 4.3 Fitting the aerial onto the rotating base
0093142122-11
Aperture
Arrow Mark
Aerial
Rotating base
Spring
Fixing Bolt
Chapter 4
Installation
Rotating base
Plain
4-5