Ata Specification (Option) - Koden MDC-1840BB Operation Manual

Chapter 3
Technical Specifications
Trail display
Every scan, 15 sec, 30 sec, 1 min, 3 min, 6 min, 12 min and OFF
interval
Alarm Entry alarm [alarm range (Minimum 0.5 NM), depth and bearing can be
varied]
EPA
Up to 10 targets can be plotted, 5 points for one target each
ATA (Option) Display of acquire/track data of up to 10 targets and Guard Zone are
available. Display of guard zone is also available (any alarm range, width
and bearing can be set).
Data available Speed, course, CPA, TCPA, distance, bearing and age (time elapsed
for EPA and ATA since the first plot, applicable to EPA only).
Minimum
20 meters at 1/8 nm range
detectable range
Range
20 meters at 1/8 nm range
resolution
Range data 70 meters or 1% of the range scale selected, whichever is the greater.
accuracy
Bearing data
+/-1
accuracy
Navigation data
Data of own ship's position (latitude/longitude)
display

3.3 ATA specification (Option)

Acquisition
Tracking
Number of targets tracked
Numerical data output
Alarm
On screen display
Display mode
Tracking distance range
ATA data output
3-2
MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
o
maximum
Manual
Automatic
Up to 10 targets
Distance, bearing, speed, CPA and TCPA
Collision alarm and lost alarm
Symbols (acquired target, tracked target, target with
data display and lost target), target number and
vectors.
Relative and True
Up to 40.0 nm
To be taken via the DATA 1 connector on the display
rear panel.
Signal level: RS422
Data format: IEC1162-1
Operation Manual
0093142122-08