Stb (Screen Stabilizing Mode); Plot Mode (Plotting Mode); Target All Clear (Plotting Target All Clear); Id Disp (Id Number Display) - Koden MDC-1840BB Operation Manual

MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
Using The Menu
6.2.3.1 STAB (Screen stabilizing Mode)
Indication
STAB

6.2.3.2 PLOT MODE (Plotting Mode)

Indication
PLOT MODE
In this radar series, the Electronic Plotting Aid (EPA) function is installed as standard,
while the Automatic Tracking Aid (ATA) unit is an optional item. To use the ATA
function, the ATA module (PCB based) must be installed inside the processor unit.
To use the EPA and ATA functions, the bearing and speed information
CAUTION:
must be applied from an external bearing/speed sensor.

6.2.3.3 TARGET ALL CLEAR (Plotting Target All Clear)

Using this function, all target plots can be cleared. To do so, highlight the "TARGET
ALL CLEAR" sign and press the ENT key.
Indication
TARGET ALL CLR

6.2.3.4 ID DISP (ID Number Display)

When this item is set to ON, the target number is indicated beside the target symbol
mark.
Indication
ID DISP

6.2.3.5 OUTLINE DISP (Outline Data Display)

When this item is set to ON, the course and speed data for 10 targets are indicated at
the data display area.
Indication
OUTLINE DISP

6.2.3.6 AIS (Automatic Identification Systems) Data Display

This function is available on option basis. For operating details, refer to Para. 6.8
"Operating the AIS."

6.2.3.7 Navigation Display, Map function

Indication
93142122-07
Meaning
Stabilizing Mode
Meaning
Plot Mode
Meaning
All plotted targets cleared
Meaning
Target ID Display
Meaning
10 Target Data Display
Meaning
Operation Manual
Selection
SEA, GND
Selection
EPA, ATA
Selection
None
Selection
OFF, ON
Selection
OFF, ON
Selection
Chapter 6
6-9