Selecting The Graphic Display / Display Item Select Menu; Selecting Each Item - Koden MDC-1840BB Operation Manual

Chapter 7 MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
Graphic Displays
NOTE: To use the graphic function, you need to enter the position data from
external Electronic Position Fix System (EPFS).

7.2 Selecting the Graphic Display / DISPLAY ITEM SELECT MENU

This menu shows the status of the current settings on all available graphic display
items.
Table 7.1
DISPLAY ITEM SELECT MENU
DISPLAY ITEM

7.2.1 Selecting each item

To select a graphic display, carry out the following procedures:
(1) Move the Joystick to the right highlighting the OFF sign and press the ENT key.
The OFF sign will blink accordingly.
(2) Move the Joystick further to the right to show the blinking ON sign.
(3) Press the ENT key to fix the selection of the graphic display. The ON sign will
become stationary and the selected graphic display will be shown overlaid with a
normal radar picture.
The above procedure applies to all DISPLAY ITEMs in the table.
WARNING: In case no positional data is entered in the selected graphic
display item, a beep sounds to alarm the operator that the item is not valid.
7-2
NAVLINE NUMBER
MAP NUMBER
COAST LINE NUMBER
MARK
Operation Manual
0 OFF
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
9 OFF
0 OFF
1 OFF
0 OFF
1 OFF
2 OFF
3 OFF
OFF
93142122-07