Data Output Function - Koden MDC-1840BB Operation Manual

Chapter 6 MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
Using The Menu
The indication and settings at CONT1
MODE
TYPE
STATUS
The indication and settings at CONT2
MODE
TYPE
STATUS
4. Settings for dual control radar system with using SCAN1
1st radar
2nd radar
The indication and settings at CONT1
MODE
TYPE
STATUS
The indication and settings at CONT2
MODE
TYPE
STATUS

6.9.4 Data output function

When using Interswitch function, one radar navigation information will be transferred
to the another radar system with NMEA0183 format. It is not necessary to connect
navigation information for both of the radar systems. The information is transferred
through DATA1 connector together with Interswitch control messages. The talker
device names of the output messages are "RA" as a radar.
6-42
OWN
INDEPENDENCE
MASTER
STANDBY
OWN
INDEPENDENCE
SLAVE
STANDBY
display unit = CONT1,
display unit = CONT2,
OWN
DUAL
MASTER
STANDBY
OWN
DUAL
SLAVE
STANDBY
Operation Manual
OTHER
INDEPENDENCE
SLAVE
STANDBY
OTHER
INDEPENDENCE
MASTER
STANDBY
scanner unit = SCAN1
scanner unit = SCAN1
OTHER
DUAL
SLAVE
STANDBY
OTHER
DUAL
MASTER
STANDBY
93142122-07