Registering Or Modifying The Map Data / Coast Line Input Menu - Koden MDC-1840BB Operation Manual

MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
Operation Manual
stationary. To clear all position data, press HL OFF key at this state.
(5) Move the Joystick up or down to highlight an alphanumeric display (A0 – B9)
under the POSITION NUMBER column. To clear the position data, press HL
OFF key at this state.
(6) Press the ENT key to let the selected alphanumeric display blink.
(7) Use the N/S/E/W and numeric keys (0 - 9) to enter the latitude and longitude
coordinates. If a correction is needed, move the Joystick left or right to highlight
the part for correction and repeat step (7) and after.
(8) Press the ENT key to fix the entry. The blinking alphanumeric data will become
stationary.
(9) To continue the registration, repeat the step (5) and after.

7.3.1 Registering or modifying the MAP data / COAST LINE INPUT MENU

(1) Select the COASTLINE input menu. The following table will be accordingly
shown.
Table 7.3 COASTLINE INPUT MENU
MAP NUMBER
COASTLINE NUMBER
POSITION NUMBER
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
(2) Move the Joystick up or down to highlight the number shown right to the words
MAP NUMBER and press the ENT key. The number will blink.
93142122-07
LATITUDE N / S
o
12 34.567
Chapter 7
Graphic Displays
0
0
LONGITUDE
o
N 123 45.678
E / W
E
7-5