Preset; Auto Tune (Auto Tune Preset) - Koden MDC-1840BB Operation Manual

Chapter 6 MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
Using The Menu
Indication
MANUAL SELECT
GAIN
SEA
RAIN

6.3.2 PRESET

This menu is protected from ordinary operations. To use this function, first turn off the
radar set. Second, press and hold the MODE key and turn the equipment on. When
the standby condition is established, turn the radar on. This allows you to enter the
PRESET menu and select the following menu functions.

6.3.2.1 AUTO TUNE (Auto Tune Preset)

Indication
AUTO TUNE
This function is used to correct the deviated automatic tuning function. Use the
following procedure to do:
(1) Prior to presetting the AUTO TUNE, open the DISP/ECHO menu and set TUNE to
AUTO.
(2) Highlight AUTO TUNE in the ADJUST/PRESET menu, and press the ENT key.
(3) Press the Joystick either up or down until the radar picture becomes the largest.
(4) Press the ENT key to fix the setting.
6.3.2.2 TUNE METER (Tuning Meter Center Preset)
Indication
TUNE METER
To make tuning meter preset, carry out the following procedure.
(1) Open the DISP/ECHO menu and set TUNE to MANUAL and press the Joystick up
or down to obtain the largest radar video presentation.
(2) Press the ENT key to fix the setting.
(3) Highlight MANUAL TUNE in the ADJUST/PRESET menu and press the ENY key.
(4) Perform the manual tuning by pressing the Joystick up or down to let the tuning
meter bar graph becomes the longest.
(5) Press the ENT key to fix the setting.
6-12
Meaning
Auto/Manual Gain
Auto/Manual STC
Auto/Manual FTC
Meaning
Auto Tune Preset
Meaning
Tuning Meter Center Preset
Operation Manual
Selection
AUTO, MANUAL
AUTO, MANUAL
AUTO, MANUAL
Selection
0 to 99
Selection
0 to 99
93142122-07