Booklet Fold Solenoid Frame Removal; Booklet Fold Solenoid Removal - Lexmark C950 Service Manual

Booklet fold solenoid frame removal

Remove the booklet unit chassis. See
1.
2. Remove the booklet unit motor assembly. See
on page 4-254.
Disconnect the connectors from the booklet fold solenoid (A).
3.
Remove the spring from the booklet fold solenoid frame (A).
4.
5. Remove the five screws securing the booklet gear train frame from the booklet unit chassis.
Remove the two e-clips from shaft X & Y.
6.
Remove the two bushings from shaft X & Y.
7.
Remove the folding solenoid frame (A).
8.
A

Booklet fold solenoid removal

1. Remove the booklet unit chassis. See
Remove the booklet unit motor assembly. See
2.
on page 4-254.
Remove the knife solenoid frame. See
3.
4. Remove the screw securing the booklet fold solenoid from the booklet fold solenoid frame (A).
"Booklet unit chassis removal" on page
"Booklet folding/exit drive motor assembly removal"
D
C
B
"Booklet unit chassis removal" on page
"Booklet folding/exit drive motor assembly removal"
"Booklet fold solenoid frame removal" on page
4-263.
Rear
4-263.
Repair information
5058-030
Previous
Next
Go Back
4-253.
4-253