User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
8. PAN/TILT ZOOM (PTZ) CONTROL
PTZ control is available to support dome cameras. The PTZ option must be configured for
each camera channel.
The layout of the PTZ interface is identical to the layout of the front of the DVR or the remote
control. The menu button is the guide anchor position for all other buttons. When in PTZ
interface mode, all buttons are used for PTZ related operation.
8.1 PTZ menu
To activate the pan/tilt control, select the full screen display of the camera you wish to
control.
Then press the [
] button. The following window pops up:
PTZ
INDICATOR
[ENTER]
[CANCEL]
[MENU]
Directions
decrease/increase
_________________________________________________________________________________
Press this button to display the "HELP" menu. Press the [ENTER] button
again or the [CANCEL] button to cancel the "Help" menu.
Press this button to cancel the "PAN/TITL" operation.
Press the [Menu] button to control all
functions via the PTZ interface. Press
this button again to access the short-
cut menu.
To tilt up/down.
To pan right/left.
To zoom in/out.
ACTIONS
- 85 -