Hdd Connection; Pc System Requirements For Network Connection - Santec SanStore-4EM User Manual

3.2 HDD connection

Please ensure that the HDD is firmly connected with the HDD rack bay.
1. Secure the hard drive by fastening the screws included with the package.
2. Secure the rack by fastening the screws included with the package.
Note:
Do not replace the HDD while the unit is recording.

3.3 PC system requirements for network connection

Intel DualCore 2,2 GHz
2 GB RAM
256 MB memory, DirectX 9 compatible
Monitor: XGA resolution (1024 x 768)
100 Mbit/sec network card
50 MB HDD for installation
Windows Vista Home Basic 32 bit; Windows XP Home SP2
DirectX 9.0
Microsoft DirectX 9.0c:
Note:
Avoid bridging the network card on this computer.
The connection and remote viewing of the DVR may not be successful on all PCs due to
the variety of PCs' Internet connection settings.
Please contact the technical support for further assistance.
_________________________________________________________________________________
It is recommended to have installed DirectX 9.0c. It can be
downloaded from the Microsoft homepage:
www.microsoft.com/windows/directx
- 16 -
User manual SanStore-4EM / SanStore-8EM