User manual
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
9. Remote access: Access the recorder via the web
9.1 Establish a network connection
You can access the recorder remotely by using the web. In order to do so, please make the
following preparations:
1. Start the recorder as usual.
2. Connect the recorder to the network using a LAN cable.
3. Open the main menu at the recorder:
Main menu Setting Network TCP/IP
As „Mode" please select „DHCP". Click on "Apply".
4. Open the main menu:
Main menu Info Network Network test
The assigned IP address is displayed, e.g. 10.1.1.67
This recorder IP address is need when you access the recorder via the web.
9.2 Login via web
Once the above preparations have been made, open the Web Browser on your PC, e.g.
Internet Explorer, Safari, Firefox. Proceed as follows:
a. In the address field of your Web Browser, enter the recorder IP address (see
above). Example:
b. If you access the recorder via the web for the first time, you will be prompted
to install a plug-in. Please confirm the installation and execute it.
_________________________________________________________________________________
http://10.1.1.67
- 53 -