Port Utilization - D-Link xStack DES-3528 series User Manual
Layer 2 managed stackable fast
Hide thumbs
Also See for xStack DES-3528 series:
- Cli reference manual (605 pages) ,
- Reference manual (378 pages) ,
- User manual (318 pages)
Table of Contents
Advertisement
®
xStack
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Port Utilization
The Port Utilization window displays the percentage of the total available bandwidth being used on the port.
To view this window, click Monitoring > Port Utilization:
To select a port to view these statistics for, select the port by using the Port pull-down menu. The user may also use
the real-time graphic of the Switch at the top of the web page by simply clicking on a port.
Change the view parameters as follows:
Parameter
Port
Time Interval
Record Number
Show/Hide
Figure 8 - 4 Port Utilization window
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
is 200.
Check whether or not to display Utilization.
262
Advertisement
Table of Contents
