Authentication Server Group - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Login Method List
Enable Method List
Click Apply to implement changes made.

Authentication Server Group

This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used
to group TACACS/XTACACS/TACACS+/RADIUS server hosts into user-defined categories for authentication using
method lists. The user may define the type of server group by protocol or by previously defined server group. The
Switch has three built-in Authentication Server Groups that cannot be removed but can be modified. Up to eight
authentications server hosts may be added to any particular group.
To view the following window, click Security > Access Authentication Control > Authentication Server Group
The Switch has four built-in Authentication Server Groups that cannot be removed but can be modified. To modify a
particular group, click on its corresponding Edit button or click the Edit Server G roup tab at the top of this window,
the following screen will be displayed.
Using the pull-down menu, configure an application for normal login on the user level, utilizing
a previously configured method list. The user may use the default Method List or other
Method List configured by the user. See the Login Method Lists window, in this section, for
more information.
Using the pull-down menu, configure an application for normal login on the user level, utilizing
a previously configured method list. The user may use the default Method List or other
Method List configured by the user. See the Enable Method Lists window, in this section, for
more information
Figure 6 - 35 Authentication Server Group Settings window
203