Voice Vlan Port Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Voice VLAN Name
Voice VLAN ID
(1-4094)
Priority
Aging Time (1-
65535)
Trap / Log

Voice VLAN Port Settings

This window allows you to configure the voice VLAN port settings.
To view this window click L2 Features > Voice VLAN > Voice VLAN Port Settings.
The following fields can be configured.
Parameter
From Port / To Port
State
Click the radio button and enter a name for a voice VLAN.
Click the radio button and enter a VLAN ID for a voice VLAN.
Use the pull down menu to set the priority of the voice VLAN. The voice VLAN priority will be
the priority associated with the voice VLAN traffic to distinguish the QoS of the voice traffic
from data traffic. It's range is 0 – 7, the default value is 5.
Enter a period of time in minutes to remove a port from voice VLAN if the port is an automatic
VLAN member. When the last voice device stops sending traffic and the MAC address of this
voice device is aged out, the voice VLAN aging timer will be started. The port will be removed
from the voice VLAN after expiration of voice VLAN aging timer.
Use the pull down menu to enable or disable the trap/log state for voice VLAN. If there is a
new voice device detected or a port join/leave the voice VLAN dynamically, and the trap/log is
enabled, then a trap/log will be triggered.
Figure 3 - 13 Voice VLAN Port Settings window
Description
A consecutive group of ports that are part of the voice VLAN configuration starting with the
selected port.
Use the pull down menu to enable or disable the voice VLAN function on the port.
80