Mld Snooping Rate Limit Settings - D-Link xStack DES-3528 series User Manual
Layer 2 managed stackable fast
Hide thumbs
Also See for xStack DES-3528 series:
- Cli reference manual (605 pages) ,
- Reference manual (378 pages) ,
- User manual (318 pages)
Table of Contents
Advertisement
®
xStack
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
MLD Snooping Rate Limit Settings
This window is used to configure the rate of MLD control packets that are allowed per port or per VLAN.
To view this window, click L2 Features > MLD Snooping > MLD Snooping Rate Limit Settings, as shown below:
The following parameters may be viewed or modified:
Parameter
Port List
VLAN List
Rate Limit
Click Apply to implement new changes.
Figure 3 - 54 MLD Snooping Rate Limit Settings window
Description
Specifies a port or range ports to configure or display.
Specifies a VLAN or range of VLANs to configure or display.
Specifies the rate of MLD control packets that the switch can process on a specific port or
VLAN. The rate is specified in packets per second. The packet that exceeds the limited rate
will be dropped. Tick the No Limit check box for unlimited rate.
110
Advertisement
Table of Contents
