Mld Snooping Static Group Settings; Mld Multicast Group Profile Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

MLD Snooping Static Group Settings

This window is used to configure the MLD Snooping static group information on the Swtich:
To view this window, click L2 Features > MLD Snooping > MLD Snooping Static Group Settings, as shown below:
The following parameters may be viewed or modified:
Parameter
VLAN Name
VLAN ID List (e.g.:1-3,5)
IPv6 Address
Click Create to create a new entry. To search for an entry enter the information and click Find. To view all previously
configured entries click View All.

MLD Multicast Group Profile Settings

This table allows the user to create MLD multicast group profiles and specify multicast address lists on the Switch.
To view this window, click L2 Features > MLD Snooping > MLD Multicast Group Profile Settings as shown below:
To configure the group list once a profile has been created, click on the hyperlinked
window:
Figure 3 - 57 Multicast Group Profile Multicast Address Settings window – Group List
Enter the Multicast Address List and click Add the new information will be displayed in the table. Click <<Back to
return to the MLD Multicast Group Profile Settings window and click Delete to remove an entry.
Figure 3 - 55 MLD Snooping Static Group Settings window
Description
Specifies the name of the VLAN for which to configure the MLD snooping static group
information.
Specifies the list of the VLAN IDs for which to configure the MLD snooping static group
information.
Specifies the static group IPv6 address for which to configure the MLD snooping static
group information.
Figure 3 - 56 MLD Multicast Group Profile Settings window
111
Group List to reveal the following