®
xStack
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
LLDP Basic TLVs Settings
TLV stands for Type-length-value, which allows the specific sending information as a TLV element within LLDP
packets. This window is used to enable the settings for the Basic TLVs Settings. An active LLDP port on the Switch
always included mandatory data in its outbound advertisements. There are four optional data types that can be
configured for an individual port or group of ports to exclude one or more of these data types from outbound LLDP
advertisements. The mandatory data type includes four basic types of information (end of LLDPDU TLV, chassis ID
TLV, port ID TLV, and Time to Live TLV). The mandatory data types cannot be disabled. There are also four data
types which can be optionally selected. These include Port Description, System Name, System Description and
System Capability.
To view this window, click L2 Features > LLDP > LLDP Basic TLVs Settings:
Use the drop-down menus to enable or disable the settings for the Basic TLVs Settings. Click Apply to implement
changes made.
The following parameters can be set:
Parameter
Description
From Port/To
Use the pull-down menu to select a range of ports to be configured.
Port
Port Description
Use the drop-down menu to enable or disable port description.
System Name
Use the drop-down menu to enable or disable system name.
System
Use the drop-down menu to enable or disable system description.
Description
System
Use the drop-down menu to enable or disable system capabilities.
Capabilities
Click Apply to implement changes made.
Figure 3 - 73 LLDP Basic TLVs Settings window
128