Voice Vlan Oui Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Mode

Voice VLAN OUI Settings

This window allows the user to configiure the user-defined voice traffic's OUI. There are some pre-defined OUIs and
when the user configures personal OUI, these pre-defined OUIs must be avoided. Followins are the pre-defined voice
traffic's OUI:
OUI
00:E0:BB
00:03:6B
00:E0:75
00:D0:1E
00:01:E3
00:60:B9
00:0F:E2
00:09:6E
To view this window click L2 Features > Voice VLAN > Voice VLAN OUI Settings.
The following fields can be configured.
Parameter
OUI Address
Mask
Description
Select the mode between Auto and Manual. If the mode is Auto, the port may become the
voice VLAN member port by auto-learning. If the MAC address of the the received packet
matches the configured OUI (Organizationally Unique Identifier) addresses, the port will be
learned as dynamic member port. The dynamic membership will be removed via the aging out
mechanism. If the mode is Manual, the port needs to be manually added into or removed from
the voice VLAN by 802.1Q VLAN configuration command.
Vendor
3COM
Cisco
Veritel
Pingtel
Siemens
NEC/ Philips
Huawei-3COM
Avaya
Figure 3 - 14 Voice VLAN OUI Settings window
Description
Enter a user-defined OUI MAC address
Enter the user-defined OUI MAC address mask.
Enter the description for the user-defined OUI.
Mnemonic Name
3com
cisco
veritel
pingtel
siemens
nec&philips
huawei&3com
avaya
81