Jwac Customize Page; Netbios Filtering Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 6 - 50 JWAC Customize Page Language window

JWAC Customize Page

To view JWAC customize page for the Switch, go to the Security > JWAC > JWAC Customize page
Figure 6 - 51 JWAC Customize Page window

NetBIOS Filtering Settings

NetBIOS is an application programming interface, providing a set of functions that applications use to communicate
across networks. NetBEUI, the NetBIOS Enhanced User Interface, was created as a data-link-layer frame structure for
NetBIOS. A simple mechanism to carry NetBIOS traffic, NetBEUI has been the protocol of choice for small MS-DOS-
and Windows-based workgroups. NetBIOS no longer lives strictly inside of the NetBEUI protocol. Microsoft worked to
create the international standards described in RFC 1001 and RFC 1002, NetBIOS over TCP/IP (NBT).
If the network administrator wants to block the network communication on more than two computers which use
NETBUEI protocol, it can use NETBIOS filtering to filter these kinds of packets.
If the user enables the NETBIOS filter, the switch will create one access profile and three access rules automatically.
If the user enables the extensive NETBIOS filter, the switch will create one more access profile and one more access
rule.
To view NetBIOS Settings on the Switch, go to the Security > NetBIOS Filtering Settings
221