Monitoring > Port Utilization - D-Link DSG-1100-10/ME Manual

D-Link DGS-1100-10/ME User Manual
Figure 4.114 – Monitoring > Memory Utilization
The information is described as follows:
Time Interval: Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Record Number: Select the number of times the Switch will be polled between 20 and 200. The default
value is 200.
Show/Hide: Check whether to display Five Secs, One Min, and/or Five Mins.
Clear: Click to clear all statistic counters on this window.
Monitoring > Port Utilization
The Port Utilization page displays the percentage of the total available bandwidth being used on the port.
Figure 4.115 – Monitoring > Port Utilization
You may use the real-time graphic of the Switch at the top of the web page to view utilization statistics per
port by clicking on a port. Click Apply to implement changes made. The following field can be set:
Time Interval: Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
6 6 9 9