Mac-Based Vlan Settings; Pvid Auto Assign Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Click Apply to implement changes.

MAC-based VLAN Settings

This table is used to create MAC-based VLAN entries on the switch. A MAC Address can be mapped to any existing
static VLAN and multiple MAC addresses can be mapped to the same VLAN. When a static MAC-based VLAN entry
is created for a user, the traffic from this user is able to be serviced under the specified VLAN regardless of the
authentiucation function operated on the port. Therefore each entry specifies a relationship of a source MAC address
with a VLAN.
To view this window click L2 Features > MAC-based VLAN Settings
The following fields can be set
Parameter Description
MAC Address Specify the MAC address to be reauthenticated by entering it into the MAC Address field.
VID (1-4094) /
Enter the VID or VLAN name of a previously configured VLAN.
VLAN Name
Click Find, Add or Delete All for changes to take affect.

PVID Auto Assign Settings

This commands Enables or Disables PVID Auto Assign on the Switch. PVID is the VLAN that the switch will use for
forwarding and filtering purposes. If PVID Auto-Assign is Enabled, PVID will be possibly changed by previously set
PVID or VLAN configurations. When a user configures a port to VLAN X's untagged membership, this port's PVID will
be updated with VLAN X. In the form of a VLAN list command, PVID is updated with the last item on the VLAN list.
When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned to a
default VLAN. When PVID Auto Assign is Disabled, PVID can only be changed by PVID configuration (user changes
explicitly). The VLAN configuration will not automatically change the PVID. The default setting is Enabled.
To view this window click L2 Features > PVID Auto Assign Settings
Figure 3 - 26 Asymmetric VLAN Settings window
Figure 3 - 27 MAC_based VLAN Settings window
Figure 3 - 28 PVID Auto Assign Settings window
92