System Log Configuration; System Log Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
the Access Authentication Control feature, discussed later in this document. Once the user has logged in to the Switch
in the Operator level, certain security screens and windows will not be made available to view, or to configure. Only
Admin level users have access to these features.
There are three levels of user privileges, Admin, Operator and User. Some menu selections available to users with
Admin privileges may not be available to those with User or Operator privileges.
The following table summarizes the Admin, Operator and User privileges:
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration Files
System Utilities
Factory Reset
User Account Management
Add/Update/Delete User Accounts
View User Accounts

System Log Configuration

This section contains information for configuring various attributes and properties for System Log Configurations,
including System Log Settings and System Log Host.

System Log Settings

This window allows the user to enable or disable the System Log and specify the System Log Save Mode Settings. To
configure the system log settings click Configuration > System Log Configuration > System Log Settings
The following parameters can be set:
Parameter
Save Mode
Minutes (1-65535)
To add a new entry, enter the appropriate information and click Apply. To save the current Log Settings, click Save
Log.
Table 2 - 1 Admin, Operator and User Privileges
Figure 2 - 10 System Log Settings window
Description
Use this drop-down menu to choose the method that will trigger a log entry. You can choose
between On Demand, Time Interval, and Log Trigger.
Enter a time interval, in seconds, for which you would like a log entry to be made.
Admin
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
24
Operator User
Yes Read-only
Yes Read-only
Yes Read-only
No No
Yes No
No No
No No
No No