Subnet-Based Vlan Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

Subnet-based VLAN Settings

The subnet-based VLAN settings are used to create, find or delete a subnet-based VLAN entry. A subnet-based
VLAN entry is an IP subnet-based VLAN classification rule. If an untagged or priority-tagged IP packet is received on
a port, its source IP address will be used to match the subnet-based VLAN entries. If the source IP is in the subnet of
an entry, the packet will be classified to the VLAN defined for this subnet.
To view this window, click L2 Features > Subnet VLAN > Subnet VLAN Settings as shown below:
The following parameters can be configured:
Parameter
VLAN Name
VLAN ID
Priority
IPv4 Network
Address
Enter the appropriate information and click Add to create a new entry. To search for a particular entry enter the
appropriate information and click Find. To remove an entry click Delete. To view all entries on the Switch click Show
All. To remove all entries click Delete All.
Figure 3 - 16 Subnet VLAN Settings window
Description
The VLAN Name to be associated with the subnet.
The VLAN ID to be associated with the subnet.
The priority to be associated with the subnet. Its range is 0-7.
Is used to specify an IPv4 network address. The format is ipaddress/prefix length. The prefix
length of the IPv4 network address cannot be greater than 64.
83