System Log Configuration; System Log Settings - D-Link xStack DES-3200 Series Reference Manual

The fields that can be configured are described below:
Parameter Description
Traps State Use the drop-down menu to enable or disable the traps state option of the warning
temperature setting.
Log State Use the drop-down menu to enable or disable the log state option of the warning
temperature setting.
High Threshold Enter the high threshold value of the warning temperature setting.
(-500-500)
Low Threshold Enter the low threshold value of the warning temperature setting.
(-500-500)
Click the Apply button to implement changes made.

System Log Configuration

System Log Settings

The Switch allows users to choose a method for which to save the switch log to the flash memory of the Switch.
To view the following window, click System Configuration > System Log Configuration > System Log Settings,
as show below:
The fields that can be configured are described below:
Parameter Description
System Log
Use the radio buttons to enable or disable the system log settings.
Save Mode Use the drop-down menu to choose the method for saving the switch log to the flash memory.
The user has three options:
On Demand – Users who choose this method will only save log files when they manually tell
the Switch to do so, either using the Save Log link in the Save folder.
Time Interval – Users who choose this method can configure a time interval by which the
Switch will save the log files, in the box adjacent to this configuration field. The user may set
a time between 1 and 65535 minutes.
Log Trigger – Users who choose this method will have log files saved to the Switch every
time a log event occurs on the Switch.
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 2-10 Warning Temperature Settings window
Figure 2-11 System Log Settings window
15