System Log Configuration; System Log Settings; System Log Server - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
User Account Management
Add/Update/Delete User Accounts
View User Accounts

System Log Configuration

This section contains information for configuring various attributes and properties for System Log Configurations,
including System Log Settings and System Log Host.

System Log Settings

This window allows the user to enable or disable the System Log and specify the System Log Save Mode Settings.
To configure the system log settings, click Configuration > System Log Configuration > System Log Settings
The following parameters can be set:
Parameter
System Log
Save Mode
min (1-65535)
To modify the system log settings on this window, enter the appropriate information and click Apply.

System Log Server

The Switch can send Syslog messages to up to four designated servers using the System Log Server.
To configure the system log settings, click Configuration > System Log Configuration > System Log Server:
The following parameters can be set:
Table 2 - 1. Admin and User Privileges
Figure 2 - 13. System Log Settings window
Description
Use the radio buttons to either enable or disable the system log feature.
Use this drop-down menu to choose the method that will trigger a log entry. Choose among
On Demand, Time Interval, and Log Trigger.
Enter a time interval, in minutes, for which a log entry is to be made.
Figure 2 - 14. System Log Server window
Yes
Yes
24
No
No