Mld Snooping Rate Limit Settings - D-Link xStack DES-3200 Series Reference Manual

After clicking the Modify Router Port
The fields that can be configured are described below:
Parameter
Static Router Port
Forbidden Router Port
Dynamic Router Port
Ports
Click the Select All button to select all the ports for configuration.
Click the Clear All button to unselect all the ports for configuration.
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.

MLD Snooping Rate Limit Settings

Users can configure the rate limit of the MLD control packet that the switch can process on a specific port or VLAN
in this page.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Rate
Limit Settings, as show below:
The fields that can be configured are described below:
Parameter
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
link, the following page will appear:
Figure 4-50 MLD Snooping Router Port Settings window
Description
This section is used to designate a range of ports as being connected to multicast-
enabled routers. This will ensure that all packets with such a router as its destination
will reach the multicast-enabled router regardless of the protocol.
This section is used to designate a range of ports as being not connected to
multicast-enabled routers. This ensures that the forbidden router port will not
propagate routing packets out.
Display router ports that have been dynamically configured.
Select the appropriate ports individually to include them in the Router Port
configuration.
Figure 4-51 MLD Snooping Rate Limit Settings window
Description
93