Installing The Virtual Media Key - IBM x3200 M3 7327 Service Manual

4. If you are instructed to return the virtual media key, follow all packaging

Installing the virtual media key

To install the virtual media key, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and all attached devices; then, disconnect all power cords.
3. Unlock and remove the side cover (see "Removing the side cover" on page
182
System x3200 M3 Types 7327 and 7328: Problem Determination and Service Guide
Virtual media
key (front)
Virtual media
key connector
instructions, and use any packaging materials for shipping that are supplied to
you.
on page 141.
145).
Mounting bracket
(rear)
Mounting tab