Installing The Lower Bezel - IBM x3200 M3 7327 Service Manual

Installing the lower bezel

To install the lower bezel, complete the following steps:
1. Insert the two bottom tabs on the lower bezel into the corresponding holes in
2. Rotate the top of the lower bezel up to the chassis; then, press the blue release
3. Reconnect the external cables and power cords; then, turn on the attached
148
System x3200 M3 Types 7327 and 7328: Problem Determination and Service Guide
the front of the chassis.
tab on the right side of the lower bezel and completely close the lower bezel
until it locks securely into place.
devices and turn on the server.