IBM x3200 M3 7327 Service Manual page 210

10. Remove the cable from the slot on the hard disk drive fan assembly; then,
11. If you are instructed to return the hard disk drive fan assembly, follow all
190
System x3200 M3 Types 7327 and 7328: Problem Determination and Service Guide
If you have the eight-drive, 2.5-inch hot-swap hard disk drive model, the hard
disk drive fan assembly looks like the following illustration.
rotate the assembly away from the drive cage and remove the assembly from
the drive cage.
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
Release
tabs
Slot
Hard disk drive
fan assembly
Slot
Release
tabs
Hard disk drive
fan assembly