Deleting Clips - JVC GY-HM650U Instructions Manual

Hd memory card camera recorder
Hide thumbs Also See for GY-HM650U:
Table of Contents

Advertisement

Time Code Playback
Time code or user's bit recorded on an SD card can
be displayed on the LCD monitor and viewfinder.
Memo :
The time code is also superimposed on the
0
video signal output from the [HD/SD SDI] output
terminal.
User's bit output from the [HD/SD SDI] output
0
terminal is used as a flag to determine valid
video signals. Therefore, accurate values will
not be output.
If a section without time code is played back, the
0
time code will stop. However, playback will
continue.
Displaying Information during Shooting
During playback, pressing the [DISPLAY] button
shows the display screen.
Pressing the [AE LOCK/4] button switches the
display information during shooting between no
display, camera information display, and GPS
display.
The GPS display displays information on the
0
recording location of the video being played
back only when GPS information has been
recorded.
The local date/time is displayed.
Camera information display displays only
0
information of Gain, Iris, Shutter and White
Balance that have been recorded.
AE LOCK/4
Hide
+139.652172
AE LOCK/4
Oct 30,2012
07:01:58PM
GPS Display
Memo :
When [System] B [Record Set] B [Record
0
Format] B System is set to "HD+SD" or "HD
+Web", only SD or web files can be played back
from slot B.
In this case, files up-converted into the HD size
are played back in the simple mode.
0
dB
F1.6
1/ 100
P 13000K
Camera Information
Display
AE LOCK/4
+35.483197

Deleting Clips

Delete clip.
MENU/THUMB
AE LEVEL
CANCEL
Memo :
Clips appended with OK marks cannot be
0
deleted on the camera recorder.
Read-only clips can be deleted on a PC.
0
Deleting One Clip
Delete the clip (one clip) pointed by the cursor in
[Delete Clips] B [This Clip] in the menu.
Memo :
Clips with OK mark cannot be deleted.
0
During Thumbnail Screen
1 Move the cursor to the clip to be deleted.
Move the cursor to the clip to be deleted using
the cross-shaped button (JKH I).
2 Press the [LOLUX/3] button.
The action selection screen is displayed.
MENU/THUMB
CANCEL
OIS / 2
LOLUX / 3
1
87

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gy-hm650e

Table of Contents