Operation Lock Feature - JVC GY-HM600U Instructions Manual

Operation Lock Feature

You can use this feature to prevent erroneous
camera operation.
MENU/THUMB
AE LEVEL
CANCEL
.
1 While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL] button for 5 seconds or
longer.
The operation lock turns on, and an
0
operation lock icon (r) appears on the
display screen.
4030 20 10 0
.
Press the [CANCEL] button again for 5
0
seconds or longer to turn off the operation
lock.
Memo :
The operation lock feature is only valid in the
0
Camera mode.
(A P16 [Operation Modes] )
The power turns off and the operation lock is
0
disengaged.
The [CANCEL] button on the LCD monitor
0
section cannot be used to turn on/off ("On/Off")
the operation lock feature.
The following remote operations are possible
0
even when the operation lock feature is turned
on ("On").
Remote operation from the wired remote
0
control connected to the [REMOTE] terminal.
Remote operation of the camera through
0
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
42
MENU/THUMB
CANCEL
00: 00: 00.00
ND 1 /64
AE 6
+
0
dB
F1.6
P 13000K 1/ 100
Operation lock does not apply to the following
buttons and switches.
[POWER ON/OFF(CHG)] switch
0
[ND FILTER] switch
0
TC [IN/OUT] selection switch
0
All switches inside the LCD monitor door
0
(however, the operation of the [CH1/CH2]
adjustment knob will be locked.)
Focus ring
0
Zoom lever at the grip/Zoom lever at the handle/
0
Zoom ring at the lens section
[ZOOM SERVO/MANUAL] switch
0
[FIX/VAR/OFF] zoom speed switch
0
Iris ring
0
[REC] button (at the top of the handle, on the grip
0
and at the bottom of the lens)
Memo :
The operation lock will also not apply to the
0
[REC] button at the bottom of the lens if [Camera
Function] B [User Switch Set] B [Front REC] is
set to "Rec".