List Of Ftp Transfer Errors - JVC CONNECTED CAM GY-HC500U Instructions Manual

Error Message
Record Format Incorrect
Media Full
No Clips
No Media
No Media
No Clips
Recording has stopped
as it has exceeded 4
hours

List of FTP Transfer Errors

If the upload of a recorded clip or download of the metadata setup file (XML format) is not successfully
completed, the following errors are displayed.
Error message
Timeout.
Media Was Removed.
Adapter Was Removed.
Cannot Connect to Server.
Status
The video format of the file for
0
Clip Review is different from the
current [WResolution],
[WFrame Rate], or [WBit Rate]
setting.
[REC] button is pressed when
0
the media in use has no
remaining space.
Remaining space ran out during
0
recording.
No viewable clips are found on the
card for Clip Review.
When the [REC] button is pressed
while a recording media is not
inserted.
No recording media is inserted while
in Media mode or when the
thumbnail screen is displayed.
No clips are found in the inserted
recording media while in Media
mode or when the thumbnail screen
is displayed.
When continuous recording in "4K
EXT (SSD)" and "HD EXT(SSD)"
has exceeded 4 hours.
Status
Transfer was discontinued due to
timeout caused by network
transmission or server failure.
Recording media is removed while
FTP transfer is in progress.
The USB network device is
removed while FTP transfer is in
progress.
Unable to connect to the FTP server. Adjust the Server and Port settings
Action
Set [WResolution], [WFrame Rate] and
[WBit Rate] correctly.
(A P157 [WResolution/
GResolution] )
(A P158 [WFrame Rate/ GFrame
Rate] )
(A P158 [WBit Rate/ GBit Rate] )
Replace the recording media with a new
one.
Insert an SD card that contains clips that
can be reviewed.
(A P48 [Recording Media] )
(A P86 [Viewing Recorded Videos
Immediately (Clip Review)] )
Insert a recording media.
(A P48 [Recording Media] )
Insert a recording media.
(A P48 [Recording Media] )
Insert a recording media that contains
playable clips.
(A P48 [Recording Media] )
(A P97 [Playing Recorded Clips] )
Start recording again.
Action
Execute again.
0
Use a different server.
0
Insert the recording media and
execute FTP transfer again.
Connect the USB network device.
for [Metadata Server] or [Clip
Server].
(A P138 [ Metadata Server... ] )
(A P149 [ Clip Server ] )
Error Messages and Actions
249