Setting The Alarm Clock - Snom m9 DECT Administrator's Manual

snom m9 DECT Administrator Guide

Setting the Alarm Clock

Setting the Wakeup Time
Important: The date and time must already be set (see
1. Press the center navigation button, followed by
2. To set the time, select Time and press OK.
3. Enter the wakeup time.
12-hour format: If you are using the 12-hour format, enter the wakeup time in 12-hour format (e.g.,
05:00 PM for 5 p.m.). To switch between A.M. and P.M., use the top/bottom edges ( hi) of the
navigation wheel before pressing OK.
If you are using the 24-hour format, enter the wakeup time in 24-hour format (e.g., 15:00 for 3:00
p.m.).
4. Press OK.
5. If you want to select a new volume or ring melody, select Alarm Ringer.
Volume: Set the volume (1–6).
Ringtone: Ten different ringtones are available.
6. Press OK to save the settings.
7. To activate the alarm, check the Activate box.
The is displayed in idle status:
Deactivating the Wakeup Call
To deactivate a wakeup call that has already been set:
1. Press the center navigation button, followed by
2. Click OK to deactivate the wakeup call, and press OK.
3. Press .
The same steps can be used to activate a wakeup call.
58
Page 49).
.
.