Snom m9 DECT Administrator's Manual page 39

3. As Windows displays New Hardware Found, note the COM port assigned to the handset.
4. Before you can connect to the snom m9 handset, you need to download the snom m9 Update Tool.
Download it at http://provisioning.snom.com/m9/snomm9UpdateTool.zip (available
only in Windows).
5. Once downloaded, extract the ZIP file, then run the executable.
6. In the COM ports dropdown, select or enter the assigned COM port.
7. Click Connect at the top of the dialog box. If you entered the correct COM port, the Connect button
will gray out.
8. Click File > Load, then select Software file.
9. From the file selection box, select the handset*.BIN file downloaded from the snom m9 web GUI.
Handset Firmware Update
31