Snom m9 DECT Administrator's Manual page 15

Note: If the handset fails to register automatically, a manual registration can also be performed. Instruc-
tions are as follows:
1. Press the center navigation button, followed by
Base 1.
2. Enter your PIN, and press OK to register the handset.
Once the handset has registered with the base, the idle screen is displayed.
4. Repeat these steps for each handset.
Setting the Server Type
This section allows you how to set the server type and specify SIP settings (instructions for Microsoft® Lync
2010 are also provided).
1. From the m9 web interface, click SIP from the top navigation bar:
2. Configure the settings as detailed below:
Server Type: Server profiles provide support for non-standard functionality of some of the most
popular VoIP platforms in the market, enabling snom m9 product ease of use and integration with
third-party IPBXs. Server-type supported platforms include:
Microsoft Lync 2010
Cisco Call Manager
Broadsoft
Asterisk
snom ONE
Metaswitch
Setting up the Handsets for Use
g g
Handset Register handset
Telepo BCS
Advoco NetPBX
Avaya CM
g
7