Snom m9 DECT Administrator's Manual page 45

Flags: Flags set additional processing attributes. The following flags are available:
Flag
d
i
Dail Plan Examples
Table 1 Examples of Dial Plans
Goal
To make the phone dial a num-
ber when the pound (#) key is
pressed.
To match an international number
To add area codes
To call a complete URI
Numbers are back references to match-groups of the regEx part accord-
ing to RFC2915.
Example: !(.+)!sip:\1! inserts a sip: before the string (which is
the first match).
Indicates that the number is complete and can be dialed.
Example: |([0-9]{5})|sip:\1@test.com|d means that a number
with five digits will be dialed automatically.
Indicates that the comparisons should be done case-insensitive.
!([^#]+)#!sip:\1@\d!d
The dial plan entry will look for a pattern ending in a pound (#)
symbol and will use this as the user name in a SIP URI (not in-
cluding the # symbol).
Put the 011 pattern at the front of the pattern:
|^011([0-9]*)$|sip:+\1@\d;phone=yes|
Example 1: If the phone number has digits between 3 and 6,
then use an area code:
|^([0-9]{3,4})$|sip:030\1@\d""|^([0-9]
{5,6})$|sip:030\1@\d
Example 2: Use an area code all the time:
|^([0-9])$|sip:030\1@\d
This is a little bit more difficult because of the number of allowed
characters in the user name. The following characters can be a
base for such a dial plan entry:
|^([a-zA-Z0-9&=+\$,;?\-_.!~*'()%]+@.+)|sip:\1|
Definition
Pattern and Result
Dial Plans
37